Designed in Australia by welders

Twelve hours in a respirator. The belt should be the easy part.

The stock belt sags, digs into your gut, and swings when you bend.

Fourteen years on WA mine sites went into fixing that.

Gear that fits your setup.

Belt. Jacket. Table. Designed by welders in Perth.

Designed in Australia by welders

Gear that fits your setup.

Twelve hours in a respirator. The belt should be the easy part. Belt, jacket, and table, built by a welder with fourteen years on WA mine sites.

Shop the range

The range

Three pieces. One setup.

Built around the respirator you already wear. Bought on odfab.com, our store, and shipped from Perth.

Welding Belt

$195

Holds the Adflo where it should sit and then forgets it is there.

Heat-resistant nylon and polypropylene
Heavy-duty quick-release buckle
Medium (32 inch waist and under) or Large

Buy the belt

Welding Jacket

$170

330gsm FR cotton outside, mesh inside, and a back cutout so it sits clean over the top of the belt.

Kevlar-stitched seams
10mm YKK metal zip, one-handed buttons
Front drops 100mm lower than standard

Buy the jacket

Welding Table

from $1,195

6mm BlueScope steel, 16mm holes on a 50mm grid, laser cut in our Perth shop.

Flat-pack tab-and-slot kit
Leg kit and levelling castors included
Eleven sizes, 900x900 to 1200x2400

Buy the table

Prices in AUD. Checkout happens on odfab.com, our store.

Ships in 24 hours 30-day returns Australian made 4.8 stars from 77 reviews

How it fits

Seat it.

The belt, the pack, and the jacket were designed as one setup. Hold the button and watch them settle into place.

Press and hold.Release early and it eases back. Keep holding and it seats.

The belt fits the unit.
The jacket fits the belt.
Nothing fights your setup.

The FabPro founder in the workshop holding a black FabPro welding jacket

Onedown Fab, Forrestdale WA

Why it exists

Fourteen years in a respirator.

FabPro started as flat-pack welding table kits cut in our Perth shop. Then came the gear. After fourteen years in the mining industry, most of it wearing a 3M Adflo, there was a long list of things we wanted different. The stock belt was first. Then a lighter jacket that works with any belt-mounted respirator. Pants, shirts, and better gloves are next.

Designed in Australia by welders.

Data sheet

The numbers, since you will ask.

Belt FP-BELT

Material: Heat-resistant nylon and polypropylene
Fits: 3M Adflo and most belt-mounted PAPR units
Buckle: Heavy-duty quick release
Sizes: Medium, 32 inch waist and under. Large, over 32 inch
Dispatch: Within 24 hours

Jacket FP-JKT

Shell: 330gsm FR 100% cotton
Lining: Breathable polyester mesh
Seams: Kevlar stitched
Closures: One-handed buttons, 10mm YKK metal zip
Cut: Front 100mm longer, oversized collar, lower back cutout
Sizes: Medium to XX-Large
Dispatch: Within 24 hours

Table FP-TABLE

Steel: 6mm BlueScope 350 grade, laser grade, no mill scale
System: 16mm holes, 50mm grid
Kit: Tab-and-slot top, weld-up legs, levelling castors, bolt kit
Sizes: Eleven, 900x900 to 1200x2400
Lead time: Up to 2 weeks if cut to order

From the shop floor

77 welders. 4.8 stars.

Within 5 minutes of putting it on I was wondering why I hadn't bought one years ago. You can tell it's been designed by someone who actually works in the trade.
Josh G.Welding Belt

Way better than the standard 3M belt, quick and easy to put on and easy adjustment. No digging into the ribs.
Reece M.Welding Belt

Incredibly comfortable, provides much better support, and stays securely in place throughout a full shift.
Jay R.Welding Belt

Somehow you have made it so that the Adflo pack is like it does not exist on the belt. Yours being elastic moves with me when I bend over.
Robert B.Welding Belt

I just literally can't believe I wore the other leather belt for 5 years.
Alastair W.Welding Belt

Fabpro harness delivered what it advertised, comfortability, practicality and reasonably priced!
Trevor G.Welding Belt

Read all 77 on odfab.com

Straight answers

Before you buy.

Will it fit my respirator?

It is designed for the 3M Adflo and works with most belt-mounted PAPR blowers. If your unit clips to a belt, it fits.

Which belt size?

Medium for a 32 inch waist and under. Large for over 32 inches. Both adjust at the buckle.

Which jacket size?

Medium to XX-Large, true to size. The front already drops 100mm lower than a standard jacket, so there is no need to size up for coverage.

Is it really better than the stock belt?

Seventy-seven welders have answered that one. The short version from the reviews: no digging into the ribs, and the pack stays put for a full shift.

How fast does it ship?

Belts and jackets leave the shop within 24 hours. Tables are laser cut to order, so allow up to 2 weeks if your size is not on the shelf.

What if it does not work for me?

Send it back within 30 days.

Kitting out a crew?

Call 0448 669 899 or email onedownfabrication@outlook.com and we will sort sizes and quantities.

Shop the range

Kit up.

Belt, jacket, and table. Ships from Perth within 24 hours.

Shop on odfab.com

Kitting out a crew? Call 0448 669 899
or email onedownfabrication@outlook.com